Your shopping basket is currently empty
Your shopping basket is currently empty
The PTFIX distribution blocks are one-piece distribution blocks that can be used to divide cables, which can then be connected in turn to wires from other cables. This is especially important as more sensor systems and elements come into use. This allows potential to be distributed or collected economically, saving time and space.
Distributors are used in the following sectors:
Distribute potential quickly? This is possible with PTFIX distribution blocks from PHOENIX CONTACT for use in control cabinets or installation distributors. At Automation24, you can find these products in the Terminal blocks / Connecting terminals section.
Barely unpacked and already connected. Completely free from manual bridging and takes up to 80% less time to assemble. This is how easy it is to connect rigid or flexible cables / wires to insulated wire end ferrules in PTFIX distribution blocks from PHOENIX CONTACT. This is thanks to tool-free push-in spring-cage technology.
Distribution blocks may either be traditionally attached to DIN rails or, if there is a lack of DIN rail space, they can be stuck to the side. The innovative adhesive installation at temperatures from -30 °C to 100 °C on thin and structured wall surfaces is reliable and durable.
The wiring is at the front and a cable channel can be attached above and below the blocks. They can also be connected across the DIN rails.
The different colours and conductor cross-sections of the distribution blocks ensure maximum flexibility, as they can be mounted in different ways, thus saving up to 50 % in the control cabinet. The different colours help you avoid wiring faults.
The blocks can be expanded in a variety of ways and can be connected to one another mechanically. There is no need for additional bridge configuration and wiring with accessories, as the necessary connections to a distribution block are internally electrically connected to a potential.
In the connection technology range, there are PHOENIX CONTACT PTFIX distributors in various sizes with different numbers of connections, nominal cross sections of 1.5 mm² or 2.5 mm² and a nominal voltage of 17.5 A or 24 A. These include blocks with multiple connections for potential distribution and monoblocks with a feed-through function that function as terminal blocks. Testing is possible for all common test probes thanks to the test opening.
Ensure a flexible, simple and cost-saving distribution of load and control current with the PTFIX distribution blocks from PHOENIX CONTACT! Buy these products at affordable prices and be impressed by the speedy delivery!